Helitorx D.38 / T35
is an innovative plastic insert that allows the installation of fences directly into compact and little gravelly soils avoiding the use of concrete or other adhesives.
The insert, made of a metal body and a helicoidal tip in plastic material, supports 38 diameter round steel posts (for a maximum fencing height of 1,50 mt) and T-posts 35x35 (for a maximum fencing height of 1,80 mt).
For professional use and DIY
ADVANTAGES
- Saving of time during installation compared with traditional techniques
- No digging and pourings of concrete or other adhesives necessary
- Movable fence
- Fast and easy installation thanks to Av-Torx, electric nutrunner at low revs, or the T-handle Key, suggested for small installations. Or with an impact wrench with a ¾ adapter ending 30×30 (we suggest a minimum power of 1200 Nm)
- Fence stability and resistance guaranteed by the conic shape and by a relevant thread that eases the insertion into the ground
- Reusable insert thanks to its high resistance to wear, breakage and weathering (over 30 years of durability)
- 100% recyclable materials and dyes consistent with RoHS Directive
- Easy and fast posts replacement thanks to the concave structure of the insert
TECH SPECS
- For fences up to 1.50 mt (4.92 ft) high with Helitorx d.38 and 1.80 mt (5.91 ft) high with Helitorx T35
- Compact and little gravelly soils
- For 38 diameter round posts
- For 35×35 T-posts
- Insertion in the ground: 500 mm (19.69 in)
- Total length: 550 mm (21.65 in)
- On request and for really good soils, the lenght of the insert’s metal body can be customized according to the insertion depth needed
APPLICATIONS
- Fences with a height from 1,50 mt (4.92 ft) up to 1,80 mt (5.91 ft)
- Perimeter fences without concrete
- Fences for heliciculture
- Support for waste baskets in parks and gardens
- Support for walkways in parks and gardens
- Support for small removable winter greenhouses
- Support for irrigation systems
- Fences for small pets
- Fences for small mountain lakes
INSTALLATION
The installation of the insert takes only a few minutes thanks to a T-handle Key (for small quantities) or by means of mechanical installation with Av-Torx, a specific nutrunner at low revs, or with the use of an impact wrench with a ¾ adapter ending 30×30 (we suggest a minimum power of 1200 Nm).
Perfectly perpendicular installation thanks to the spirit level supplied with our mounting tools.
INFORMATION REQUEST
Find your
nearest dealer
Discover authorized dealers and installers of Agojet products near you!