GENERAL QUESTIONS

No, it is absolutely unnecessary. Agojet system for in-ground fences (Agojet Torx; Agojet Terra d.50; Agojet Terra d.60) completely excludes the use of concrete or other adhesives. Each insert has a peculiar structure that, thanks to the thread, the bending-resistant section, the overturn protection wings, and the depth of insertion in the ground, guarantees the fence strenght according to the use instructions.

The new Agojet sales policy does not allow the direct sale to private citizens. You can send us an estimate request by filling in the specific form. Our sales office and sales network will manage it for you.

All the Agojet inserts are made of 100% recyclable and resistant to weathering plastic material.

You can visit the AUTHORIZED DEALERS page of our website. For further information or if your area is not covered, you can contact us directly at agojet@vaer.it or calling at +39 0522 646585.

You can contact us calling at +39 0522 646585 or sending us an email at agojet@vaer.it. We will put you in contact with our Sales Manager.

AGOJET TORX D.38 / T30

No, you can’t. Agojet Torx is suitable for installations in compact (clayey or sandy) or little gravelly soils. If the ground has a gravelly or stony composition we recommend you to use Agojet Cemento.

No, you can’t. Agojet Torx is suitable for fences up to 1.20 mt high. For higher installations we recommend you to use the Agojet Terra product line that, thanks to a deeper insertion in the ground, guarantees a correct fence strength.

Agojet Torx supports 38-diameter round posts. Posts with different sizes don’t fit the insert and do not guarantee the correct fence resistance.

It is highly recommended to use our Av-Torx nutrunner, specifically designed at low revs to avoid widening the pre-hole made to ease the Agojet Torx insertion in the ground.

Yes, the pre-hole is compulsory because it helps the insert enter the soil without excessively force the nutrunner. It also allows to probe the ground in order to understand its composition.

The installation of the insert takes only a few minutes thanks to the mechanical installation with Av-Torx, specific nutrunner at low revs, or with an impact wrench with a ¾ adapter ending 30×30 (we suggest a minimum power of 1200 Nm).
Av-Torx is available from our dealers, who can rent it out to you for as long as necessary.

For information about the nearest dealer, you can visit the AUTHORIZED DEALERS page of our website or you can contact us directly calling at +39 0522 646585 or writing an email at agojet@vaer.it.

AGOJET TERRA D.48-50

No, you can’t. Agojet Terra d.48-50 is suitable for installations in compact (clayey or sandy) or with a moderately gravelly layer. If the ground has a gravelly or stony composition we recommend you to use Agojet Cemento.

No, you can’t. Agojet Terra d.48-50 is suitable for fences up to 1.75 mt high. For higher installations we recommend you to use Agojet Terra d.60.

Agojet Terra d.48-50 supports 48/50-diameter round posts or 40×40 square posts. Posts with different sizes don’t fit the insert and do not guarantee the correct fence strength.

The minimum excavator weight suggested for a correct installation is of 8 tons.

Agojet Terra d.48-50 has overturn protection wings that guarantee a distribution of the fence strength not only on the central cylinder, but on a wider surface. This guarantees a stable and solid fence.

AGOJET TERRA D.60

No, you can’t. Agojet Terra d.60 is suitable for installations in compact (clayey or sandy) or with a moderately gravelly layer. If the ground has a gravelly or stony composition we we recommend you to use Agojet Cemento.

No, you can’t. Agojet Terra d.60 is suitable for fences above 1.75 mt and up to 3 mt high.

Agojet Terra d.60 supports 60-diameter round posts. Posts with different sizes don’t fit the insert and do not guarantee the correct fence strength.

The minimum excavator weight suggested for a correct installation is of 10 tons.

Agojet Terra d.60 has overturn protection wings that guarantee a distribution of the fence strength not only on the central cylinder, but on a wider surface. This guarantees a stable and solid fence.

AGOJET CEMENTO

Yes, Agojet Cemento has to be inserted directly in fresh concrete at the desired distance, without using bottles or any other positioning systems.

Agojet Cemento comes with a spirit level holder that has to be put in the insert when placing it in fresh concrete, in order to install it perfectly perpendicular to the pouring.

Agojet Cemento supports 38-diameter round posts and 30×30 T-posts. Posts with different sizes don’t fit the insert and do not guarantee the correct fence strength.

Externally, Agojet Cemento has a self-threading screw. We recommend you to tighten it once the post is in to guarantee a better stability and safety.

Agojet Cemento has a closing cap designed to avoid water infiltrations in the insert.

AV-TORX

Av-Torx, thanks to its low revs is not a drill, so it doesn’t dig holes in the ground. It’s a nutrunner with an electric engine that screws the insert into the pre- hole. Furthermore, thanks to the spirit level it is equipped with, it guarantees a perfectly perpendicular positioning into the ground.

Av-Torx, thanks to its low revs is not a drill, so it doesn’t dig holes in the ground. It’s a nutrunner with an electric engine that screws the insert into the pre- hole. Furthermore, thanks to the spirit level it is equipped with, it guarantees a perfectly perpendicular positioning into the ground.

Yes, the pre-hole is compulsory because it helps the insert enter the soil without excessively force the nutrunner. It also allows to probe the ground in order to understand its composition.

Av-Torx is available from our dealers, who can rent it out to you for as long as necessary. For information about the nearest dealer, you can visit the AUTHORIZED DEALERS page of our website or you can contact us directly calling at +39 0522 646585 or writing an email at agojet@vaer.it.